Renault MASTER 2024 User Manual page 256

ADDITIONAL DRIVING AID FUNCTIONS
Activating and deactivating the
alerts from the trip computer 5
3
– With the vehicle stationary, press
the switch 6 as many times as re­
quired to reach the
pending on the vehicle, the
or
– press switch 6 and repeatedly press
control 6 or 7 to reach the
– depending on the vehicle, press
switch 9 OK;
– repeatedly press control 7 or 8 to
reach the menu, then press
switch 9 OK;
2 5 4 - D r i v i n g
– repeatedly press control 7 or 8 to
reach the "DRIVING ASSIST" menu,
then press switch 9 OK;
– repeatedly press control 7 or 8 to
reach the "Vigilance warning" menu,
then press switch 9 OK;
– press the switch 9 OK again to acti­
vate or deactivate the alerts:
–
–
Limitations of system operation
Some conditions can disrupt or dam­
age the operation of the system, for
example:
– certain driving styles (incorrect dri­
ving etc.) ;
– driving on a road in poor condition;
– strong side wind;
tab or, de­
– The clock is wrongly configured (de­
pending on vehicle);
tab;
– winding roads;
– trailer traction.
Operating faults
tab;
If the system detects a fault, the "Vigi­
lance monit. to check" message and
the
on the instrument panel. Have the sys­
tem checked by an authorised dealer.
alerts activated
alerts deactivated
warning light are displayed
Detection of road signs
The system displays speed limits on
the instrument panel according to road
signs detected on the side of the road.
It mainly uses information taken from
the camera 1 attached to the wind­
screen behind the rear view mirror.
Depending on the country, the system
also uses information from a map sub­
scription to interpret certain signs
(town entrance, etc.).
The sign displayed on the instrument
panel changes when a road sign is de­
tected by the system.
Once the speed limiter or the cruise
control is activated, you can adapt the
limited speed setpoint to the speed