Nec Backup Controls; Start Up; Guidelines For Backups - NEC POWERMATE P - SERVICE MANUAL 1995 Service And Reference Manual

2-32 Setup and Operation

NEC Backup Controls

NEC Backup provides the following controls for selecting backup functions:
n
Type of backup box
choose, "Full backup" and "Incremental backup."
n
Full backup button
n
Incremental backup button
Microsoft Backup.
n
Start the selected backup button
procedure you selected in the "Type of backup box". The utility verifies the
selected backup procedure before it runs Microsoft Backup.
n
Remove from StartUp group button
Windows StartUp group.
NEC Backup was placed in your Windows StartUp group to prompt you to do a
backup when you run your new system for the first time. It appears automatically
every time you run Windows. If you do not want NEC Backup to run every time
you enter Windows, click on this button to remove NEC Backup from your
StartUp group.
n
Help Brings up this help document.
n
Exit Exits NEC Backup.

Start Up

To use the NEC Backup, follow these simple steps:
Choose (click) a backup procedure in the "Type of backup box." This provides a
1.
backup type for Microsoft Backup to run, but does not start the backup
procedure.
Click on "Start the selected backup." NEC Backup prompts you to verify the
2.
selected backup type. Confirm the backup type. Microsoft Backup runs the
selected procedure.
3. Select the "Exit" button to exit NEC Backup.

Guidelines for Backups

Incremental Backups are particularly useful right before you do something that might
endanger data files for certain sets of files. For example, before you make modifications to a
database or set of drawings. Or when you write new code and need to test it.
Contains the list of backup procedures that you can
Selects the Full Backup procedure for Microsoft Backup.
Selects the Incremental Backup procedure for
Runs Microsoft Backup using the backup
Removes NEC backup from your