NEC POWERMATE P - SERVICE MANUAL 1995 Service And Reference Manual page 104

3-30 Option Installation
2. Check the connectors on each speaker cable that came with the speakers. The left
speaker cable has a black connector on each end. The other cable is a Y-cable.
The Y-cable has a red and white connector at one end and the other end is black
with two rings on the connector.
3. Attach the left speaker cable (with the black connectors at each end) to the
speaker as follows.
n
Insert one end of the speaker cable into the jack marked "LEFT SPEAKER
INPUT" on the back of the left speaker.
n
Insert the other end of the speaker cable into the jack marked "L SPEAKER
OUTPUT" on the back of the right speaker.
Left Speaker
Figure Section 3-22 Connecting the Two Speakers
Left Speaker Cable
Y-Cable
Figure Section 3-21 Speaker Cables
Right Speaker (with controls)
Two Rings
Red
White
Left Speaker
Cable