Download Print this page

Invacare LiNX DLX-REM400 User Manual page 93

Hide thumbs Also See for LiNX DLX-REM400:

Advertisement

Invacare® LiNX
Fault 
Fault Description
icon
Module fault (other 
than remote 
module)
1 Configuration of the motors depending on the wheelchair model
6.2    OON ("Out Of Neutral")
OON ("Out Of Neutral") is a safety feature that prevents accidental 
operation of power wheelchair functions when the system's primary 
input is in an out of neutral position.
For proportional joysticks, an out of neutral position is when the 
joystick is outside or greater than the neutral window. For discrete 
(switch) joysticks, an out of neutral position is when the joystick is 
outside or greater than the switch threshold. For switches, out of 
neutral is when one or more switches are activated.
An OON indication is displayed when the primary input is out of 
neutral and one of the following occurs:
 
the system is powering up,
l
 
after a function change,
l
 
when the system comes out of an inhibit or drive lock-out,
l
 
when the settings menu is exited,
l
 
when indirect navigation is exited,
l
93
Possible action
 
Check cables and 
l
connectors.
 
Check modules.
l
 
Recharge batteries.
l
 
If the chair was stalled, 
l
reverse away or 
remove obstacle.
 
Contact your provider.
l
 
when Rest is exited or 
l
 
on Live Handover.
l
OON activation is slightly different between a drive function 
and a non-drive function for quadrants that have no 
programmed output.
 
For non-drive functions, such as seating, OON is not 
l
activated if the primary input is in an out of neutral 
position in a quadrant, that has not been programmed 
for an output. This is particularly useful, for example, for 
Head Array users who may have just the left and right 
pads programmed for output, allowing to rest the head 
on the middle pad without activating an OON.
 
For drive functions, no matter how the quadrants are 
l
programmed, OON is always activated when the primary 
input is out of neutral when powering up or when waking 
from sleep.
Drive OON Warning
During a drive OON warning, the OON overlay is 
displayed and the wheelchair does not drive. If the 
primary input is returned to neutral position, the 
warning clears and the wheelchair drives normally.
1637423-K

Advertisement

loading
Need help?

Need help?

Do you have a question about the LiNX DLX-REM400 and is the answer not in the manual?

Questions and answers