Invacare LiNX DLX-REM400 User Manual page 17

4 Usage
4.1 Powering Up / Down Remote
Powering Up Remote
A
The status LED inside the ON/OFF key lights up green, if no fault is
present at power up. After a few seconds display is ready to use.
If there is a fault with the system when powering up, the status LED
indicates the fault with a series of red flashes, also a fault icon is
displayed in the status bar. For more information about fault
indication, refer to 6.1.1 Fault Codes and Diagnosis Codes, page 92.
1637423-K
1. Press ON/OFF key A.
2. Start screen lights up.
Powering Down Remote
1. Press ON/OFF key A.
Shut down screen is displayed.
After a few seconds the remote is powered
down.
Attendant in Charge
If your wheelchair is fitted with an attendant control
(DLX-ACU200) and the attendant control is in charge, an
attendant-in-charge-overlay is displayed.
Also the status LED inside the ON/OFF key of the
primary remote is turned off.
1. Press ON/OFF key A of primary remote to take
over control.
Attendant control powers down automatically.
For more information about using the attendant control, refer
to the manual of the attendant control.
4 Usage
17