Invacare LiNX DLX-REM400 User Manual page 59

Pairing PC or Laptop with LiNX System
Perform this operation promptly to the Pairing process on your remote. Otherwise, a timeout will occur.
1. Open Devices and Printers dialog box on your Windows PC or
laptop.
There are a number of ways to do this:
Start → Devices and Printers,
l
Start → Control Panel → Devices and Printers,
l
Icon tray → click on Bluetooth Device icon
l
3.
4.
Wait for device to connect.
Click on Next as soon as device is connected.
6.
If the device paired successfully, a
confirmation screen is displayed on the
remote module. Tap on the OK button to
proceed.
LiNX system permits up to ten devices to be paired at any time. If you have reached this limit and you need to add more devices, consider
forgetting devices, that have already been paired, refer to 4.18.2 Operating the Mouse Mover, page 65.
1637423-K
2.
From Devices and Printers dialog box, click
on Add a device button.
All available devices are displayed. Locate LiNX device name that is
displayed on the touch screen (REM-J16130951) and select it.
Click on Next button.
5.
Click on Close button to complete Add a
device action.
If no device is paired within the set timeout
period, a message is displayed "No device
was paired". Tap on OK button to proceed.
4 Usage
59