Invacare LiNX DLX-REM400 User Manual page 49

4.13 Locking / Unlocking the Remote
By default, lock function is disabled. Contact your provider to change the configuration. If the function is enabled, the system can be locked /
unlocked using below described sequence.
Locking the Remote
1. Press ON/OFF key for more than three seconds,
until a locking overlay is displayed.
2. Remote powers down.
When powering up remote, locking overlay is
displayed.
If you do not apply the unlock sequence or the ON/OFF key is pressed again before the unlock sequence is complete, the system returns to
the locked state and powers down.
4.14 Rest Mode
Rest mode provides an environment (or state), where the primary input is disabled, but control inputs can still be operated. When in this mode
you are free to perform other activities with the confidence that any subsequent demands, intentional or accidental, from the primary input do
not result in a driving or seating action.
Rest mode is indicated by the rest screen.
Rest can be entered automatically after a period of user inactivity (timeout) or manually via a control input (CI).
1637423-K
Unlocking the Remote
1. Press ON/OFF key.
A
2. Tap on locked display until white frame
around locking screen A is filled.
3. Touch display is unlocked and can be
used again.
4 Usage
49