Invacare LiNX DLX-REM400 User Manual page 22

Invacare® LiNX
Audible Cues
(For more information about audible cues, refer to 4.20 Audible Cues, page 70.)
A
B
C
Interaction
A
B
C
Connectivity
For more i nformation about connectivity settings, refer to 4.17 Configuring Connectivity Cards, page 57.
22
Entry
Mode
A
Tempo (optional)
B
C Volume
Entry
A Tap-Only Mode
B Tap Zone
C Left Hand Mode
Function
Select On to enable audible cues and Off to disable audible cues.
Adjust speed at which audible cues are played. Slowest speed is to the left,
fastest to the right.
Set volume of audible cues. On REM500 two volume settings are displayed,
one for front and one for rear speaker.
Function
Toggle between tap-only mode and swipe-and-tap mode.
Defines the area used for detecting a tap action on touch screen. It sets the area
around the point of initial contact, within a tap is recognised. Outside this area,
further, continuous contact will be considered as a drag / swipe.
Recommendation:
Good dexterity →Low value (small tap zone)
l
Poor dexterity → High value (large tap zone)
l
This parameter does not change the area around fixed inputs (buttons,
links, etc.). It is solely for the area around the first point of contact when
tapping or swiping.
Toggle between right-hand and left-hand usage of remote. When the switch is set
to ON, all user c ontrols (navigation button, speed slider, lighting controls etc) a re
displayed and operable from the left-hand side of the screen.
1637423-K