Invacare LiNX DLX-REM400 User Manual page 23

4.2.5 Configuring Odometer
A Total distance meter
A
B Trip meter
B
C Reset button
C
D Units selector
D
E
E Back
The total distance meter shows the cumulative value of all trips.
The total distance meter cannot be reset from this screen.
Contact y our provider to reset this value.
The trip meter displays the current trip value. This is the value t hat is
displayed on the drive cards.
Resetting Odometer
1.
Tap and hold navigation button A to open
Menu screen.
A
1637423-K
B
2.
Tap on Odometer button.
Tap on Reset to zeroC to reset t rip value.
3.
Changing Units
Tap on units selector D to change displayed
units. mi for miles, km for kilometres.
Tap on button E to go back to Menu screen.
C
D
E
4.
F Tap on button F to close Menu screen.
4.3 Selecting Functions
You can locate and select a function card by navigating through the
programmed profiles and functions. There are different ways of
navigation that can be used, depending on your needs and abilities.
These methods fall into two groups:
direct navigation and
l
indirect navigation.
l
How to navigate through the LiNX system depends on how the
navigation button is configured. Refer to 2.3 Navigation Button, page
11, for more information about the possible configurations.
The units can also be set through the
display configuration s ettings, refer
to 4.2.4 Configuring Settings, page
21.
4 Usage
23