Invacare LiNX DLX-REM400 User Manual page 72

Invacare® LiNX
Profile Index
Profile 1 Profile 2
A profile index is played when navigating between profiles, playing one note for the first profile, two notes for the second profile, three notes for
the third profile and so on.
When navigating with menu select in list view, menu scan in list view or menu scan in grid view, the profile index is played in isolation. That means
the profile index plays and no other audible cue follows.
When navigating with direct navigation or menu select in grid view, it is possible to navigate from a function in one profile to a function in an
adjacent profile, so the profile index is followed by a further audible cue to identify the newly highlighted function.
Example
Profile Index
72
Profile 3 Profile 4
For example, when navigating down from the function in the second profile, to the second function in the
third profile, the profile index is followed by a further audible cue to identify this function.
Function Identifier
Profile 5
If function identifiers are used, then three sound elements
are played:
1. profile index (e.g. three notes to indicate third profile)
2. navigation cue (e.g. drive function)
3. function identifier (e.g. function identifier is set to 2)
1637423-K