Invacare LiNX DLX-REM400 User Manual page 25

4.4.2 Tap-Only Mode
Changing Function Cards
1.
2.
3. Tap on selected function card, tap navigation button or wait for a
few seconds to activate selected function card.
Changing Profiles
1. Profile
1
Profile
2
Profile
3
Profile
4
2. Tap on navigation button or wait for a few seconds to activate
selected function card.
1637423-K
Tap on navigation button (short press)
to open card preview display.
Tap to left or right of card that is in the
middle of display to change function
cards.
Tap above or below function
card that is in the middle of
display to activate another
profile.
The screen view focuses on
the first function card or the
last-used function card in the
profile depending on how the
programming is set up.
4.4.3 Control Input (CI)
A control input can be any external switch, for example, an egg switch
or a lip switch at a Sip and Puff Array.
1. Short press to change function card.
2. Long press to change profile.
No card preview is displayed. The function cards change and become
active immediately.
4.5 Using Indirect Navigation
Indirect navigation is the ability to navigate through different profiles
and function cards, independently from the touch display, with the
help of the active user input (for example, a Head Array).
By default, the indirect navigation is disabled. Contact your provider, if
indirect navigation should be enabled.
There are different indirect navigation methods:
menu select (using list or grid view)
l
menu scan (using list or grid view)
l
List View
List view presents the menu items in one or two
vertically selectable lists, where one list presents
the profiles and the next list presents the selected
profile's functions. When a menu item becomes
selectable, its background is highlighted blue.
4 Usage
25