Invacare LiNX DLX-REM400 User Manual page 71

Navigation Cues
Navigation cues are played during menu navigation when highlighting a function menu item and again when entering the function card.
Navigation Type
Drive function
Seating function
Utility function
Mouse mover- / switch
function
Function Identifier
A function identifier is an optional audible cue that is played directly after a navigation cue. It provides a count by repeating the same note and it is
useful, for example, to identify functions of the same type within the same profile.
The function identifier can be set your provider. The number of times this note repeats can be 1 to 6. This parameter can also be set to None or
Reverse. If set to None, no function identifier cue is played after a navigation cue. If set to Reverse, a single note is played with a longer duration
and higher frequency than the note used for the repeating function identifier.
Function =
Identifier = None
Drive 1
In this example four drive functions of the same profile are shown. The function identifier are has been set for each drive function with the
following values: None, 1, 2 and Reverse.
1637423-K
Sound Navigation Cue Condition
Played when highlighting a drive menu item and again when entering the function card.
Played when highlighting a seating menu item and again when entering t he function card.
Played when highlighting a utility menu item and again when entering the function card.
Played when highlighting a mouse mover or switch menu item and again when entering
the function card.
Function =
Identifier = 1
Drive 2
Function =
Identifier = 2
Drive 3
Function =
Identifier = Reverse
Drive 4
4 Usage
71