Chapter 45 Command Examples; Command Examples Overview; Sys Commands; Log Show Command - ZyXEL Communications IES-1248-51 User Manual

This chapter gives some examples of commands.

45.1 Command Examples Overview

These are commands that you may use frequently in configuring and maintaining your IES-
1248. See Chapter 48 on page 313
VLAN.

45.2 Sys Commands

These are the commonly used commands that belong to the sys (system) group of commands.

45.2.1 Log Show Command

Syntax:
ras> sys log show
This command displays the system error log. An example is shown next.

Figure 144 Log Show Command Example

ras> sys log show
1 Wed Aug 11 20:37:11 2004 telnetd
2 Wed Aug 11 20:37:05 2004 telnetd
3 Wed Aug 11 20:36:56 2004 telnetd

45.3 Log Format

The common format of the system logs is:
<log message>

Table 93 Log Format

LABEL
<item no>
<time>

Chapter 45 Command Examples

Command Examples
for commands that deal with the IEEE 802.1Q Tagged
.
DESCRIPTION
This is the index number of the log entry.
This is the time and date when the log was created.
IES-1248-51/51A/53 User's Guide
C
H A P T E R
INFO Session Begin!
INFO Session Begin!
INFO Session Begin!
<item no> <time> <process> <type>
4 5
289