Statistics Port Command; Figure 148 Statistics Port Command Example - ZyXEL Communications IES-1248-51 User Manual

45.6 Statistics Port Command

Syntax:
ras> statistics port <portlist> [<vpi> <vci>] [clear]
where
<portlist>
<vpi> <vci>
[clear]
This command displays and/or erases port statistics.
The following example displays port statistics for ADSL port 1.

Figure 148 Statistics Port Command Example

ras> statistics port 1
[adsl port 1]
tx packets
rx packets
tx uni-packets
rx uni-packets
tx nonuni-packets : 19
rx nonuni-packets : 0
tx discard packets: 0
rx discard packets: 0
errors
tx rate
rx rate
tx bytes
rx bytes
where
tx uni-packets
rx uni-packets
tx nonuni-
packets
rx nonuni-
packets
Chapter 45 Command Examples
You can specify a single port <1>, all ports <*> or a list of ports
=
<1,3,enet1>. You can also include a range of ports
<1,5,6~10,enet1,enet2>.
The VPI and VCI of an individual PVC.
=
Use
=
clear
PVC's counters back to zero.
: 20
: 0
: 1
: 0
: 0
(bytes/s): 0
(bytes/s): 128
: 5904
: 0
This field shows the number of unicast packets transmitted on
=
this port.
This field shows the number of unicast packets received on this
=
port.
This field shows the number of non-unicast (broadcast and
=
multicast) packets transmitted on this port.
This field shows the number of non-unicast (broadcast and
=
multicast) packets received on this port.
IES-1248-51/51A/53 User's Guide
to have the IES-1248 set the specified port(s) or
295