IES-1248-51/51A/53 User's Guide
Table 44 MVLAN Setup (continued)
LABEL
Name
VLAN ID
Port
Control
Tagging
Add
Cancel
22.4 MVLAN Group Screen
Use this screen to configure ranges of multicast IP addresses for each multicast VLAN. To
open this screen, click Advanced Application, Multicast VLAN, MVLAN Group.
Figure 90 MVLAN Group
180
DESCRIPTION
Enter a descriptive name for the multicast VLAN. The name can be 1-31
printable ASCII characters long. Spaces are not allowed.
Enter the VLAN ID of the multicast VLAN; the valid range is between 1 and
4094.
This field displays each port number.
Select Fixed for the port to be a permanent member of this multicast VLAN. Use
the Select All button to include every port.
Select Forbidden if you want to prohibit the port from joining this multicast
VLAN. Use the Select All button to include every port.
Select TX Tagging if you want the port to tag all outgoing frames transmitted
with this VLAN ID. Use the All button to include every port. Use the None button
to clear all of the ports check boxes.
Click Add to save your changes to the IES-1248's volatile memory. The IES-
1248 loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to begin configuring the fields afresh.
Chapter 22 Multicast VLAN