Alarm Tablelist Command; Figure 151 Alarm Port Set Command Example; Figure 152 Alarm Tablelist Command Example - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51/51A/53 User's Guide
The following example has the IES-1248 only record critical alarms on DSL port 7.

Figure 151 Alarm Port Set Command Example

ras> alarm port set 7 critical

46.6 Alarm Tablelist Command

Syntax:
ras> alarm tablelist [<alarm>|all] [<severity>|all]
[<fac>|all][<target>[,<target>]] [<condition>|all]
where
<fac>
<target>
This command lists alarm settings.
The following example displays the supported minor level alarms for all alarm categories,
facilities, types of alarm messages and conditions.

Figure 152 Alarm Tablelist Command Example

ras> alarm table
no alarm
--- ------ -------------------------
1 dsl (
2 dsl (
3 dsl (
4 dsl (
5 dsl (
6 dsl (
7 dsl (
8 dsl (
9 dsl (
10 dsl (
----------------------------------------------------Snip-------------------
--------------------------------
300
The log facility (
=
syslog messages to different files in the syslog server. See your
syslog program's documentation for details.
=
snmp|syslog|all
is to send (SNMP, syslog or all).
condition
5000)line_enable
5001)line_disable
5002)line_up
5003)line_down
5004)line_cross_thresh
5005)line_planrate
5006)line_ldm
5007)line_ldm_done
5008)line_pml2
5009)line_pml0
) that has the device log the
local1~local7
The type of alarm messages that the device
facility snmp syslog severity clearable
--------- ---- ------ -------- -------
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
Chapter 46 Alarm Commands
info -
info -
info -
minor V
minor -
minor -
info -
info -
info -
info -