Editable Configuration File Upload; Figure 216 Configuration File Example; Figure 217 Example: Use An Ftp Client To Connect To The Ies-1248 - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51/51A/53 User's Guide
Note: Ensure that any changes you make to the commands in the configuration file
correspond to the commands documented in this User's Guide. The wrong
configuration file or an incorrectly configured configuration file can render the
device inoperable.

Figure 216 Configuration File Example

#### sysinfo
sys info hostname ""
sys info location ""
sys info contact ""
#### snmp
sys snmp getcommunity public
sys snmp setcommunity public
sys snmp trapcommunity public
sys snmp trustedhost 0.0.0.0
sys snmp trapdst set 1 0.0.0.0 162
sys snmp trapdst set 2 0.0.0.0 162
sys snmp trapdst set 3 0.0.0.0 162
sys snmp trapdst set 4 0.0.0.0 162
#### server
sys server enable telnet
sys server enable ftp
sys server enable web
sys server enable icmp
sys server port telnet 23
sys server port ftp 21
--------------- Snip ------------------------------------------------------
-------------
Note: The
text editor. Attempting to edit it and upload it to the IES-1248 will lock you out
after the system restarts. If this happens you will have to use the console port
to restore the default configuration file, and all of your configuration changes
will be lost.

53.3.3 Editable Configuration File Upload

You can upload the configuration file by following the steps below.
Use an FTP client to connect to the IES-1248.

Figure 217 Example: Use an FTP Client to Connect to the IES-1248

C:\> ftp <IES-1248 IP address>
Type your user name and press [ENTER].
User (172.23.15.86:(none)): admin
356
sys user set admin
command is encrypted and you cannot edit it in a
Chapter 53 Firmware and Configuration File Maintenance