Mvlan Setup Screen; Table 43 Mvlan Status - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51/51A/53 User's Guide
The following table describes the labels in this screen.

Table 43 MVLAN Status

LABEL
MVLAN Setup
MVLAN Group
The Number of
MVLAN
Index
Name / VID
1~48
ENET1-2
Status

22.3 MVLAN Setup Screen

Use this screen to configure basic settings and port members for each multicast VLAN. To
open this screen, click Advanced Application, Multicast VLAN, MVLAN Setup.
178
DESCRIPTION
Click MVLAN Setup to open the MVLAN Setup screen where you can configure
basic settings and port members for each multicast VLAN (see
page 178).
Click MVLAN Group to open the MVLAN Group screen where you can
configure ranges of multicast IP addresses for each multicast VLAN (see
Section 22.4 on page 180).
This is the number of multicast VLAN configured on the IES-1248.
The first table displays the names of the fields. The subsequent tables show the
settings for each multicast VLAN.
This is a sequential value and is not associated with this multicast VLAN.
This field shows the name and VLAN ID of this multicast VLAN.
These fields display whether or not each port is a member of this multicast
VLAN. "V" displays for members and "-" displays for non-members. You can
change these settings in the MVLAN Setup screen.
This field shows whether this multicast VLAN is active (Enable) or inactive
(Disable).
Section 22.3 on
Chapter 22 Multicast VLAN