Vlan Port Setting Screen; Table 33 Static Vlan Setting - ZyXEL Communications IES-1248-51 User Manual

The following table describes the labels in this screen.

Table 33 Static VLAN Setting

LABEL
VLAN Status
VLAN Port Setting
VID
Active
Name
Delete
Cancel
Active
Name
VLAN ID
Port
Control
Tagging
Add
Cancel

19.5 VLAN Port Setting Screen

Use this screen to specify port VLAN IDs and to set whether or not Ethernet ports propagate
VLAN information to other devices.
To open this screen, click Advanced Application, VLAN, VLAN Port Setting.
Chapter 19 VLAN
DESCRIPTION
Click VLAN Status to see which of the IES-1248's ports are members of which
VLANs (see Section 19.3 on page
Click VLAN Port Setting to specify Port VLAN IDs (PVIDs). See
page 161.
This field displays the ID number of the VLAN group. Click the number to edit the
VLAN settings.
This field indicates whether the VLAN settings are enabled (Yes) or disabled
(No).
This field displays the descriptive name for this VLAN group.
Select the check boxes of the rule(s) that you want to remove in the Delete
column and then click the Delete button.
You cannot delete a VLAN if any PVIDs are set to use the VLAN or the VLAN is
the CPU (management) VLAN.
Click Cancel to clear the Delete check boxes.
Select this check box to enable the VLAN.
You cannot disable a VLAN if any PVIDs are set to use the VLAN or the VLAN is
the CPU (management) VLAN.
Enter a descriptive name for this VLAN group for identification purposes. Spaces
are not allowed.
Enter the VLAN ID for this static VLAN entry; the valid range is between 1 and
4094.
The port numbers identify the IES-1248's ports.
Select Fixed for the port to be a permanent member of this VLAN group. Use the
Select All button to include every port.
Select Forbidden if you want to prohibit the port from joining this VLAN group.
Use the Select All button to include every port.
Select TX Tagging if you want the port to tag all outgoing frames transmitted
with this VLAN ID. Use the All button to include every port. Use the None button
to clear all of the ports check boxes.
Click Add to save your settings. The VLAN then displays in the summary table
at the top of the screen.
Clicking Add saves your changes to the IES-1248's volatile memory. The IES-
1248 loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to begin configuring the fields afresh.
IES-1248-51/51A/53 User's Guide
158)
Section 19.5 on
161