Static Vlan Setting Screen; Figure 76 Static Vlan Setting - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51/51A/53 User's Guide
Table 32 VLAN Status (continued)
LABEL
Elapsed Time
Status
Poll Interval(s)
Set Interval
Stop
Previous Page
Next Page

19.4 Static VLAN Setting Screen

You can assign a port to be a member of a VLAN group or prohibit a port from joining a
VLAN group in this screen. This is an IEEE 802.1Q VLAN.
To open this screen, click Advanced Application, VLAN, Static VLAN Setting.

Figure 76 Static VLAN Setting

160
DESCRIPTION
This field shows how long it has been since a normal VLAN was registered or a
static VLAN was set up.
This field shows that this VLAN was added to the IES-1248 statically, that is,
added as a permanent entry.
The text box displays how often (in seconds) this screen refreshes. You may
change the refresh interval by typing a new number in the text box and then
clicking Set Interval.
Click Stop to halt polling statistics.
Click one of these buttons to show the preceding/following screen if the
information cannot be displayed in one screen.
Chapter 19 VLAN