Table 53 802.1X - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51/51A/53 User's Guide
The following table describes the labels in this screen.

Table 53 802.1x

LABEL
RADIUS/Local
Profile
Enable
Apply
Cancel
Port
Enable
Control
Reauthentication
Reauthentication
Period(s)
Apply
Cancel
196
DESCRIPTION
Click this link to configure the RADIUS server or local profile settings (see
Section 26.2 on page 194).
Select this check box to turn on IEEE 802.1x authentication on the switch.
Click Apply to save your changes to the IES-1248's volatile memory. The IES-
1248 loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
This field displays a port number.
Select this check box to turn on IEEE 802.1x authentication on this port.
Select AUTO to authenticate all subscribers before they can access the network
through this port.
Select FORCE AUTHORIZED to allow all connected users to access the
network through this port without authentication.
Select FORCE UNAUTHORIZED to deny all subscribers access to the network
through this port.
Specify if a subscriber has to periodically re-enter his or her username and
password to stay connected to the port.
Specify how often a client has to re-enter his or her username and password to
stay connected to the port.
Click Apply to save your changes to the IES-1248's volatile memory. The IES-
1248 loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Chapter 26 Port Authentication