Figure 77 Vlan Port Setting; Table 34 Vlan Port Setting - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51/51A/53 User's Guide

Figure 77 VLAN Port Setting

The following table describes the labels in this screen.

Table 34 VLAN Port Setting

LABEL
VLAN Status
Static VLAN
Port
PVID
Priority
GVRP
Acceptable Frame
Type
Apply
162
DESCRIPTION
Click VLAN Status to see which of the IES-1248's ports are members of which
VLANs (see Section 19.3 on page
Click Static VLAN to configure ports to dynamically join a VLAN group or
permanently assign ports to a VLAN group or prohibit ports from joining a VLAN
group (see Section 19.4 on page
The port numbers identify the IES-1248's ports.
Type the Port VLAN ID (PVID) from 1 to 4094. The IES-1248 assigns the PVID
to untagged frames or priority frames (0 VID) received on this port.
Select an IEEE 802.1p priority to assign to untagged frames or priority frames (0
VID) received on this port.
Select this check box if the IES-1248 should use GVRP to automatically register
and configure VLAN membership.
Select All to have the port accept both tagged and untagged incoming frames.
Select Tag Only to have the port only accept incoming frames that have a VLAN
tag.
Click Apply to save your changes to the IES-1248's volatile memory. The IES-
1248 loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
158).
160).
a
Chapter 19 VLAN