Figure 80 Igmp (Status); Table 35 Igmp (Status) - ZyXEL Communications IES-1248-51 User Manual

Figure 80 IGMP (Status)

The following table describes the labels in this screen.

Table 35 IGMP (Status)

LABEL
Bandwidth Setup
IGMP Setup
Filter Setup
Count Setup
IGMP Port Info
IGMP Port Group
Clear
Query
Report
Leave
Number of IGMP
Groups
Previous
Next
Reload
Chapter 20 IGMP
DESCRIPTION
Click Bandwidth Setup to open the IGMP Bandwidth screen where you can
set up bandwidth requirements for multicast channels (see
168). You can also open the Bandwidth Port Setup screen to set up multicast
bandwidth requirements for selected ports (see
Click IGMP Setup to open the IGMP Setup screen where you can configure
IGMP settings (see Section 20.5 on page
Click Filter Setup to open the IGMP Filter Profile screen where you can
configure IGMP multicast filter profiles (see
Click Count Setup to open the IGMP Count screen where you can limit the
number of IGMP groups a subscriber on a port can join (see
page 171).
Click IGMP Port Info to open the IGMP Port Info screen where you can look at
the current number of IGMP-related packets received on each port (see
20.8 on page 172).
Click IGMP Port Group to open the IGMP Port Group screen where you can
look at the current list of multicast groups each port has joined (see
on page 173).
Click Clear to delete the information the IES-1248 has learned about multicast
groups. This resets every counter in this screen.
This is the total number of Query packets received.
This is the total number of Report packets received.
This is the total number of Leave packets received.
This is how many IGMP groups the IES-1248 has identified on the local network.
Click one of these buttons to show the previous/next screen if all of the
information cannot be seen in one screen.
Click this button to refresh the screen.
IES-1248-51/51A/53 User's Guide
Section 20.4 on page
Section 20.4.1 on page
170).
Section 20.6 on page 171).
Section 20.7 on
Section 20.9
169).
Section
167