Load Factory Defaults; Reboot System; Figure 137 Restore Default Configuration; Figure 138 Restore Factory Default Settings, Reboot - ZyXEL Communications IES-1248-51 User Manual

2 In the Save As screen, choose a location to save the file on your computer from the Save
in drop-down list box and type a descriptive name for it in the File name list box. Click
Save to save the configuration file to your computer.
Note: See the CLI chapters to edit the configuration text file.
Note: You can change the ".dat" file to a ".txt" file and still upload it back to the IES-
1248.

40.5 Load Factory Defaults

Use this function to clear all device configuration information you configured and return to the
factory defaults.
Note: Warning! Restoring the default configuration deletes all the current settings. It is
recommended to back up the configuration file before restoring the default
configuration.
To do this, click Management, Maintenance, Click here (Restore Default Configuration).

Figure 137 Restore Default Configuration

Click OK to begin resetting all device configurations to the factory defaults and then wait for
the device to restart. This takes up to two minutes. If you want to access the web configurator
again, you may need to change the IP address of your computer to be in the same subnet as
that of the default device IP address (192.168.1.1).

Figure 138 Restore Factory Default Settings, Reboot

40.6 Reboot System

Use this function to restart the device without physically turning the power off.
Chapter 40 Maintenance
IES-1248-51/51A/53 User's Guide
257