Log Messages; Table 87 Log Messages - ZyXEL Communications IES-1248-51 User Manual

IES-1248-51/51A/53 User's Guide

41.2.1 Log Messages

The following table lists and describes the system log messages.

Table 87 Log Messages

LOG MESSAGE
ADSL <port> Link
Up(SN=<seq no>): <ds
rate>/<us rate>!
or
ADSL Link Info: NM:<ds
NM>/<us NM>!
ADSL <port> Link
Down(SN=<seq no>)!
Session Begin!
Session End!
Incorrect Password!
Received Firmware
Checksum Error!
Received Firmware Size
too large!
Received Firmware
Invalid!
Received File <file>!
THERMO OVER
TEMPERATURE: dev:<id>
threshold:<threshold>(
degree C)
value:<temp>(degree
C)!
THERMO OVER
TEMPERATURE released:
dev:<id>
threshold:<threshold>(
degree C)
value:<temp>(degree
C)!
262
TYPE DESCRIPTION
An ADSL port established a connection.
INFO
<port> - port number
<seq no> - sequence number of the connection
<ds rate> - downstream rate
<us rate> - upstream rate
<us NM> - upstream noise margin
<ds NM> - downstream noise margin
An ADSL port lost its connection.
WARN
<port> - port number
<seq no> - sequence number of the connection
A console, telnet or FTP session has begun (see the
INFO
<process> field for the type of session).
A console telnet or FTP session has terminated (see the
INFO
<process> field for the type of session).
Someone attempted to use the wrong password to start a
WARN
console, telnet or FTP session (see the <process> field for the
type of session).
A checksum error was detected during an attempted FTP
WARN
firmware upload.
The file size was too large with an attempted FTP firmware
WARN
upload.
Someone attempted to upload a firmware file with a wrong
WARN
identity via FTP.
A file was uploaded to the IES-1248 by FTP.
INFO
<file> - received file's name
The temperature was too high at one of the temperature
WARN
sensors.
<id> -
0: sensor near the ADSL chipset
1: sensor near the CPU
2: thermal sensor chip itself
<threshold> - threshold temperature
<temp> - temperature when the entry was logged
The temperature at one of the temperature sensors has come
INFO
back to normal.
<id>
0: sensor near the ADSL chipset
1: sensor near the CPU
2: thermal sensor chip itself
<threshold> - threshold temperature
<temp> - temperature when the entry was logged
Chapter 41 Diagnostic