Figure 118 Tls Pvc; Table 67 Tls Pvc - ZyXEL Communications IES-1248-51 User Manual

Figure 118 TLS PVC

The following table describes the labels in this screen.

Table 67 TLS PVC

LABEL
Port
VPI
VCI
DS VC Profile
US VC Profile
VID
Priority
Apply
Chapter 33 TLS PVC
DESCRIPTION
Use this drop-down list box to select a port for which you wish to set up a TLS
PVC. This field is read-only once you click on a port number below.
Type the Virtual Path Identifier for a channel on this port.
Type the Virtual Circuit Identifier for a channel on this port.
Use the drop-down list box to select a VC profile to use for this channel's
downstream traffic shaping.
Use the drop-down list box to select a VC profile to use for this channel's
upstream traffic. The IES-1248 does not perform upstream traffic policing if you
do not specify an upstream VC profile.
Note: Upstream traffic policing should be used in conjunction with
the ATM shaping feature on the subscriber's device. If the
subscriber's device does not apply the appropriate ATM
shaping, all upstream traffic will be discarded due to
upstream traffic policing.
Type a VLAN ID to assign to frames received on this channel.
Note: Make sure the VID is not already used for PPPoA-to-
PPPoE conversions.
Use the drop-down list box to select the priority value (0 to 7) to add to incoming
frames without a (IEEE 802.1p) priority tag.
Click this to add or save channel settings on the selected port.
This saves your changes to the IES-1248's volatile memory. The IES-1248 loses
these changes if it is turned off or loses power, so use the Config Save link on
the navigation panel to save your changes to the non-volatile memory when you
are done configuring.
IES-1248-51/51A/53 User's Guide
225