IES-1248-51/51A/53 User's Guide
Table 54 Port Security (continued)
LABEL
Apply
Cancel
Copy port
Paste
198
DESCRIPTION
Click Apply to save your changes to the IES-1248's volatile memory. The IES-
1248 loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Do the following to copy settings from one port to another port or ports.
1 Select the number of the port from which you want to copy settings.
2 Click Paste and the following screen appears.
3 Select to which ports you want to copy the settings. Use All to
select every port. Use None to clear all of the check boxes.
4 Click Apply to paste the settings.
Figure 100 Select Ports
Chapter 27 Port Security