Chapter 13 Remote Management Configuration
You may only have one remote management session running at a time. The ZyXEL Device
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
2 HTTP
Finding Out More
See
Section 13.3 on page 137
configuration.
13.1.1 What You Can Do in the Remote Management Screen
Use the Remote Management screen
interface and from which IP address users can use Telnet, FTP or HTTP to manage the ZyXEL
Device.
13.2 The Remote Management Screen
Click Remote Management to open the following screen.
Figure 65 Remote Management
The following table describes the fields in this screen.
Table 49 Remote Management
LABEL
Server Type
Access Status
Port
Secured Client
IP
136
for technical background information on remote management
(Section 13.2 on page
DESCRIPTION
Each of these labels denotes a service that you may use to remotely manage the
ZyXEL Device.
Select the access interface. Choices are All, LAN Only, WAN Only and Disable.
This field shows the port number for the remote management service. You may
change the port number for a service in this field, but you must use the same port
number to use that service for remote management.
The default 0.0.0.0 allows any client to use this service to remotely manage the
ZyXEL Device. Type an IP address to restrict access to a client with a matching IP
address.
136) to configure through which
P-660W-Tx v2 User's Guide