The 802.1Q/1P Port Setting Screen - ZyXEL Communications P-660HN-T1H User Manual

Table 56 Advanced > 802.1Q/1P > Group Setting > Edit (continued)
LABEL
Tx Tag
Back
Apply
Cancel

13.3 The 802.1Q/1P Port Setting Screen

Use this screen to configure the PVID for each port. Click Advanced > 802.1Q/
1P > Port Setting to display the following screen.
Figure 82 Advanced > 802.1Q/1P > Port Setting
P-660HN-T1H User's Guide
DESCRIPTION
Select Tx Tagging if you want the port to tag all outgoing traffic
trasmitted through this VLAN. You select this if you want to create VLANs
across different devices and not just the ZyXEL Device.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 13 802.1Q/1P
167