Configure Vlan Port Setting; Figure 34 Vlan: Static Vlan: Vlan Port Setting; Table 20 Vlan: Static Vlan - ZyXEL Communications VES-1616F-44 User Manual

VES-1616F/1624F-44 User's Guide
The following table describes the related labels in this screen.

Table 20 VLAN: Static VLAN

LABEL
ACTIVE
Name
VLAN Group ID
Port
Control
Tagging
Add
Cancel
Clear
VID
Active
Name
Delete
Cancel

7.5.3 Configure VLAN Port Setting

To configure the VLAN settings on a port, click the VLAN Port Setting link in the VLAN
Status screen. Refer to

Figure 34 VLAN: Static VLAN: VLAN Port Setting

84
DESCRIPTION
Select this check box to activate the VLAN settings.
Enter a descriptive name for the VLAN group for identification purposes.
Enter the VLAN ID for this static VLAN; the valid range is between 1 and 4094.
The port number identifies the port you are configuring.
Select Normal for the port to dynamically join this VLAN group using GVRP. This is
the default selection.
Select Fixed for the port to be a permanent member of this VLAN group.
Select Forbidden if you want to prohibit the port from joining this VLAN group.
Select TX Tagging if you want the port to tag all outgoing frames (that were
previously untagged) transmitted with this VLAN Group ID.
Click Add to add the settings as a new entry in the summary table below.
Click Cancel to reset the fields.
Click Clear to start configuring the screen again.
This field displays the ID number of the VLAN group. Click the number to edit the
VLAN settings.
This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).
This field displays the descriptive name for this VLAN group.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
Section 7.1 on page 79 for background information.
Chapter 7 VLAN