Mechanical; Environmental Conditions; Table 4-7 Environmental Specifications - Quantum FIREBALL PLUS AS 10.2 Product Manual

Specifications
4.7 4.7 4.7 4.7

MECHANICAL

MECHANICAL MECHANICAL MECHANICAL
Quantum Fireball Plus AS hard disk drives are designed to meet the form factor
dimensions of the SFF committee specification SFF8300.
Height: 26.1 mm maximum
Width: 101.6 ± 0.25mm
Depth: 147 mm maximum
Weight: 1.35 lb
4.8 4.8 4.8 4.8

ENVIRONMENTAL CONDITIONS

ENVIRONMENTAL CONDITIONS ENVIRONMENTAL CONDITIONS ENVIRONMENTAL CONDITIONS
Table 4-7 summarizes the environmental specifications of the Quantum Fireball
Plus AS hard disk drives.
PARAMETER PARAMETER
PARAMETER PARAMETER
1
Temperature
(Non-condensing)
Temperature Gradient
(Non-condensing)
2
Humidity (Non-condensing)
Maximum Wet Bulb
Temperature
Humidity Gradient
3, 4
Altitude
Altitude Gradient
1. Maximum operating temperature must not exceed the drive at any point along
the drive form factor envelope. Airflow or other means must be used as needed
to meet this requirement.
2. The humidity range shown is applicable for temperatures whose combination
does not result in condensation in violation of the wet bulb specifications.
3. Altitude is relative to sea level.
4. The specified drive uncorrectable error rate will not be exceeded over these
conditions.
4-8 Quantum Fireball Plus AS 10.2/20.5/30.0/40.0/60.0 GB AT

Table 4-7 Environmental Specifications

Table 4-7
Table 4-7 Table 4-7
OPERATING OPERATING
OPERATING OPERATING
5° to 55°C
(41° to 131°F)
20°C/hr maximum
(68°F/hr)
10% to 85% RH
30°C (86°F)
10% / hour
–200 m to 3,000 m
(–650 to 10,000 ft.)
1.5 kPa/min
NON-OPERATING NON-OPERATING
NON-OPERATING NON-OPERATING
-40° to 65°C
(-40° to 149°F)
30°C/hr maximum
(86°F/hr)
5% to 95% RH
40°C (104°F)
10% / hour
–200 m to 12,000 m
(–650 to 40,000 ft.)
8 kPa/min