Installing Your Robot; Table 19: The Control Box Carton Contents; Table 20: The Semi Emergency Off Switch Carton Contents - Techman Robot TM12S Series Hardware Installation Manual

The SEMI Emergency OFF Switch carton contains:

6.4 Installing Your Robot

The TM AI Cobot arm cannot stand independently after being removed from the carton. Therefore, prepare the
mounting base with the corresponding holes as described in 4.2.1.5 Robot Arm Installation, and follow the
instructions below to install the robot.
WARNING:
At the installation site, at least two people should simultaneously perform installation of the
robot; otherwise you risk robot arm damage or personal injury. Do not install the robot alone.

Table 19: The Control Box Carton Contents

Table 20: The SEMI Emergency OFF Switch Carton Contents

Power cable of the control box
(TM12S-M / TM14S-M)
(1 cable)
Length: 120 cm
Ground Wire
2 wires
Length: 200 cm
SEMI Emergency OFF Switch
(SEMI series exclusive)
(1 pack)
Cable length: 300 cm