Safety Information; Overview; Warning And Caution Symbols; Safety Precautions - Techman Robot TM12S Series Hardware Installation Manual

2. Safety Information

2.1 Overview

Users should read, understand and abide by the safety information provided in this manual before using the TM
AI Cobot.

2.2 Warning and Caution Symbols

The table below shows the definitions of the warning and caution levels used in this manual. Pay close attention
to them when reading the manual, and observe them to avoid personal injuries or equipment damage.

2.3 Safety Precautions

DANGER:
This product can cause serious injury or death, or damage to itself and other equipment, if the
following safety precautions are not observed.
⚫ All personnel who install, operate, teach, program, or maintain the system must read the Hardware
installation Manual, Software Manual, and Safety Manual according to the software and hardware version of
this product, and complete a training course for their responsibilities in regard to the robot.
⚫ All personnel who design the robot system must read the Hardware installation Manual, Software Manual,
and Safety Manual according to the software and hardware version of this product, and must comply with all
local and national safety regulations for the location in which the robot is installed.
DANGER:
Identifies an imminently hazardous situation which, if not avoided, is likely to result in
serious injury, and might result in death or severe property damage.
WARNING:
Identifies a potentially hazardous situation which, if not avoided, will result in minor or
moderate injury, and might result in serious injury, death, or significant property damage.
CAUTION:
Identifies a potentially hazardous situation which, if not avoided, might result in minor
injury, moderate injury, or property damage.

Table 2: Danger, Warning, and Caution Symbols

Read Manual and Impact Warning Labels