Show Platform Stack-Manager - Cisco Catalyst 3120 Command Reference Manual

Appendix C Cisco Catalyst Blade Switch 3120 for HP Show Platform Commands

show platform stack-manager

Use the show platform stack-manager privileged EXEC command to display platform-dependent
switch-stack information.
Syntax Description all
counters
trace [sdp [reverse]]
trace [state [reverse]]
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History Release
12.2(40)EX
Usage Guidelines
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-12248-01
show platform stack-manager {all | counters | trace [sdp [reverse] | state [reverse]]}
[ | {begin | exclude | include} expression]
Display all information for the entire switch stack.
Display the stack manager counters.
Display trace information. The keywords have these meanings:
•
•
Display trace information. The keywords have these meanings:
•
•
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
sdp—(Optional) Display Stack Discovery Protocol (SDP) information.
reverse—(Optional) Display trace information in reverse chronological
order (from recent to older chronological sequence).
state—(Optional) Display stack state machine information.
reverse—(Optional) Display trace information in reverse chronological
order (from recent to older chronological sequence).
Cisco Catalyst Blade Switch 3120 for HP Command Reference
show platform stack-manager
C-39