Registered Trademarks - Endress+Hauser IO-Link Dosimag Operating Instructions Manual

Dosimag IO-Link
Endress+Hauser
Document type
Operating Instructions (BA)
Description of Device Parameters
(GP)
Safety Instructions (XA)
Supplementary device-dependent
documentation (SD/FY)
1.4

Registered trademarks

®
Is a registered trademark. It may only be used in conjunction with products and services by
members of the IO-Link Community or by non-members who hold an appropriate license.
For more specific guidelines on use, refer to the IO-Link Community rules on:
www.io-link.com.
KALREZ®
Registered trademarks of DuPont Performance Elastomers L.L.C., Wilmington, DE USA
TRI-CLAMP®
Registered trademark of Ladish & Co., Inc., Kenosha, USA
Purpose and content of the document
Your reference document
These Operating Instructions contain all the information that is required
in the various life cycle phases of the device: from product identification,
incoming acceptance and storage, to mounting, connection, operation
and commissioning, through to troubleshooting, maintenance and
disposal.
Reference for your parameters
The document provides a detailed explanation of each individual
parameter. The description is aimed at those who work with the device
over the entire life cycle and perform specific configurations.
Depending on the approval, safety instructions for electrical equipment in
hazardous areas are also supplied with the device. The Safety Instructions
are a constituent part of the Operating Instructions.

Information on the Safety Instructions (XA) that are relevant for
the device is provided on the nameplate.
Always comply strictly with the instructions in the relevant
supplementary documentation. The supplementary documentation is a
constituent part of the device documentation.
About this document
7