16.12 Certificates And Approvals - Endress+Hauser IO-Link Dosimag Operating Instructions Manual

Technical data
Remote operation
CE mark
UKCA marking
RCM marking
Ex-approval
64
Select the appropriate version and download.
https://ioddfinder.io-link.com/
1. Enter "Endress" as the manufacturer and select.
2. Select product name.
 A list of search results is displayed.
Select the appropriate version and download.
→  31

16.12 Certificates and approvals

Current certificates and approvals for the product are available at
relevant product page:
1. Select the product using the filters and search field.
2. Open the product page.
3. Select Downloads.
The device meets the legal requirements of the applicable EU Directives. These are listed in
the corresponding EU Declaration of Conformity along with the standards applied.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
The device meets the legal requirements of the applicable UK regulations (Statutory
Instruments). These are listed in the UKCA Declaration of Conformity along with the
designated standards. By selecting the order option for UKCA marking, Endress+Hauser
confirms a successful evaluation and testing of the device by affixing the UKCA mark.
Contact address Endress+Hauser UK:
Endress+Hauser Ltd.
Floats Road
Manchester M23 9NF
United Kingdom
www.uk.endress.com
The measuring system meets the EMC requirements of the "Australian Communications
and Media Authority (ACMA)".
• Only measuring instruments with the order code for "Approval", option "BT", "FC" and "US"
have an Ex approval.
• The devices are certified for use in hazardous areas and the relevant safety instructions
are provided in the separate "Safety Instructions" (XA) document. Reference is made to
this document on the nameplate.
Dosimag IO-Link
www.endress.com on the
Endress+Hauser