16.13 Accessories - Endress+Hauser IO-Link Dosimag Operating Instructions Manual

Dosimag IO-Link
Hygienic compatibility
Pressure Equipment
Directive
Additional certification
External standards and
guidelines
Endress+Hauser
• 3-A SSI 28-06 or more recent
• Confirmation by affixing the 3-A logo.
• The 3-A approval refers to the measuring instrument.
• When installing the measuring instrument, ensure that no liquid can accumulate on
the outside of the measuring instrument.
• EHEDG Type EL Class I
• Confirmation by affixing the EHEDG symbol.
• EPDM is not a suitable seal material for media with a fat content > 8 %.
• To meet the requirements for EHEDG certification, the device must be used with
process connections in accordance with the EHEDG position paper entitled "Easy
cleanable Pipe couplings and Process connections" (www.ehedg.org).
• Seals: FDA-compliant (except Kalrez seals)
• Pasteurized Milk Ordinance (PMO)
• With the marking
a) PED/G1/x (x = category) or
b) PESR/G1/x (x = category)
on the sensor nameplate, Endress+Hauser confirms compliance with the "Essential
Safety Requirements"
a) specified in Annex I of the Pressure Equipment Directive 2014/68/EU or
b) Schedule 2 of Statutory Instruments 2016 No. 1105.
• Devices not bearing this marking (without PED or PESR) are designed and manufactured
according to sound engineering practice. They meet the requirements of
a) Art. 4 Para. 3 of the Pressure Equipment Directive 2014/68/EU or
b) Part 1, Para. 8 of Statutory Instruments 2016 No. 1105.
The scope of application is indicated
a) in diagrams 6 to 9 in Annex II of the Pressure Equipment Directive 2014/68/EU or
b) Schedule 3, Para. 2 of Statutory Instruments 2016 No. 1105.
IO-Link
Self-certification with Manufacturer Declaration
• EN 60529
Degrees of protection provided by enclosures (IP code)
• EN 61010-1
Safety requirements for electrical equipment for measurement, control and laboratory
use
• EN 61326-1/-2-3
EMC requirements for electrical equipment for measurement, control and laboratory use
• CAN/CSA C22.2 No. 61010-1-12
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory
Use, Part 1: General Requirements
• ANSI/ISA-61010-1 (82.02.01)
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory
Use – Part 1: General Requirements

16.13 Accessories

Overview of accessories available to order →  51
Technical data
65