AMX Optima AVS-OP-1616-110 Instruction Manual page 87

Appendix E – Replacing an Optima Power Supply
11. Apply external AC power to the enclosure.
12. Check the following items:
If the listed items are all okay, go to Step 13.
If one or more of the items is not working, see the Troubleshooting section on page 88.
13. Unplug the AC power cord from the enclosure.
14. Replace and tighten all the remaining screws on the upper and lower edges of the front panel.
15. Push the enclosure back into the rack; replace and tighten the rack ear screws.
16. Plug in the external AC power cord.
80
The front panel power light is illuminated green.
The LCD screen is active (control panels only).
Optima Insturction Manual