AMX Optima AVS-OP-1616-110 Instruction Manual page 40

Signal Types & Connectors
Signal types and connectors for an Optima enclosure could include those listed in the table below.
Analog video (composite)
S-Video
Y/c
RGBHV
Wideband Video (300 MHz & 500 MHz)
DVI-D
Digital video (HD-SDI & SD-SDI)
Analog audio – stereo (balanced or unbalanced) Pluggable 5-position terminal block
Digital audio – S/PDIF & TosLink
Video Connectors
The video BNC connectors are color coded; the white connectors are inputs and the black connectors are
outputs. In addition, the first connector on each board has a colored band that designates the signal type
of that board.
RGBHV
R = Red
G = Green
B = Blue
H = White
V = Black
Audio Connectors
For information on wiring specific types of connectors, see the specific board chapter in this manual.
Optima Instruction Manual
Signal Type
Signal Type = Color of Band
RGBS Y/Pb/Pr
R = Red
Y = Green
G = Green
Pb = Blue
B = Blue
Pr = Red
S = Black
Connector Type
BNC
S-Video
BNC
HD-15
BNC
DVI-I
BNC
Coaxial (RCA) & optical
Y/c Composite
Y = Yellow V = Yellow
C = Black
Installation & Setup
33