Front View - AMX Optima AVS-OP-1616-110 Instruction Manual

Overview & General Specifications
Optima Features (continued)
Control Features
Optima systems support three different protocols: BCS* (Basic Control Structure), XNNet, and TCP/IP.
Several different control options are available for Optima systems. Multiple control methods can be used
on the same system.
* BCS is sent as ASCII characters through the RS-232 port. For information on BCS commands, see the
BCS Protocol Instruction Manual on the AMX AutoPatch CD or at www.amx.com.
Note: Features and specifications described in this document are subject to change without notice.

Front View

The enclosure, which is the structural basis of the Optima Distribution Matrix, is available in many
convenient pre-configured sizes or can be custom built for your installation. An enclosure may have
either a blank front panel or one of various control panels (front or remote panels produced by AMX
AutoPatch for controlling the system's switches and system attributes). Although control panels are
optional, we recommend one per system for system verification, redundant control, and troubleshooting.
Control panel illustrations and directions for use are provided in the specific Control Panel Instruction
Manual (available on the AMX AutoPatch CD or at www.amx.com). For more control options, see
page 15.
10
Optional expansion boards with TCP/IP or XNNet ports
Links for status display devices
Volume control (standard audio)
Audio connections support balanced or unbalanced audio
Rack mounting ears included
Front control panel options or blank front panel
Remote control panel options
®
NetLinx compatible controller (for specific control programming information, contact your
AMX representative)
APControl 3.0 software (free with all systems)
APWeb (TCP/IP control via an expansion board or an external module)
Supports AMX AutoPatch's simple BCS serial control protocol
Supports third-party controllers
Optima Instruction Manual