AMX Optima AVS-OP-1616-110 Instruction Manual page 93

Distribution matrix
Hide thumbs Also See for Optima AVS-OP-1616-110:
Table of Contents

Advertisement

Appendix E – Replacing an Optima Power Supply
5.
Place the ring terminal of the enclosure's ground wire over the screwhole in the mount. Replace the
single screw at the top of the power supply mount, securing the ground wire to the mount and the
power supply mount to the enclosure.
FIG. 66
Replace ground wire and screw
6.
Plug the enclosure's AC wire harness into the power supply's AC connector (FIG. 67). Note that the
connector has a locking tab on the left.
FIG. 67
Attach AC wiring harness
7.
Attach the power supply's DC wiring harness into the connector on the Backplane (FIG. 68). Note
that the connector has double locking tabs.
FIG. 68
Attach DC wiring harness
86
Power supply AC connector
AC wiring harness
DC wiring harness
Optima Insturction Manual

Advertisement

Table of Contents
loading

Table of Contents