AMX Optima AVS-OP-1616-110 Instruction Manual page 78
Distribution matrix
Hide thumbs
Also See for Optima AVS-OP-1616-110:
- Product view (1 page) ,
- Configuration manual (4 pages)
Table of Contents
Advertisement
8.
Using the standard File Open dialog box, locate and open the XCL (*.xcl) configuration file that
was sent with the new board. The default location is in the C:\AutoPatch\Configuration
Software<Version>\MyXCL folder.
9.
For XNConnect version 2.4.0 – from the Configure menu, select Configure All.
The system automatically reboots all devices.
Or
For XNConnect versions prior to 2.4.0 – from the Configure menu, select Reboot All Devices.
10. Execute a test switch that includes a signal routed on the new board to ensure the system is working
correctly. (Repeat for any additional new boards.)
If the test switch does not execute correctly, contact technical support (see page 39).
Optima Instruction Manual
Appendix D – Adding or Replacing I/O Boards
71
Advertisement
Table of Contents
