Xnnet Expansion Board - AMX Optima AVS-OP-1616-110 Instruction Manual

XNNet Expansion Board

Applicability Notice
This chapter pertains to the Optima 2 RU XNNet expansion board, SA1046-310.
XNNet expansion board
FIG. 120 XNNet
An XNNet expansion board is required to attach an external XNNet device to an Optima 2 RU
enclosure. An XNNet device is any device that sends and receives XNNet protocol over the Link A
(XNNet) port.
External XNNet devices include the following AMX AutoPatch products:
If ordered with the system, the XNNet board is installed at the factory. For information on connecting a
device to the XNNet board, see page 155.
If the board is ordered as an upgrade for an existing system, it will need to be installed. For instructions
on installing an expansion board, see page 154.
If an XNNet device is included in the order, see the device's documentation for its installation
information.
Optima Instruction Manual
expansion board
Remote control panels (e.g., CP-15, CP-20A)
SBC and Preset SBC
XNNet Expansion Board
153