Viewing Dynamic Addresses - 3Com 3CRUS2475 User Manual

Viewing Dynamic
Addresses
The Dynamic MAC Address page contains information for querying
information in the dynamic address table, including the interface type,
MAC addresses, VLAN, and table sorting. Packets forwarded to an
address stored in the address table are forwarded directly to those ports.
The Dynamic MAC Address page also contains information about the
aging time before a dynamic MAC address is erased, and includes
parameters for querying and viewing the Dynamic Address list. The
Current Address Table contains dynamic address parameters by which
packets are directly forwarded to the ports.
To open the Dynamic MAC Address Summary Page:
1 Click Wired Ports > Address Tables > Dynamic Addresses >
Summary. The Dynamic MAC Address Summary Page opens:
Figure 60 Dynamic MAC Address Summary Page
The Dynamic MAC Address Summary Page contains the following fields:
Aging Interval (10-630) — Specifies the amount of time the MAC
■
Address remains in the Dynamic MAC Address before it is timed out if
no traffic from the source is detected. The default value is 300
seconds.
Clear Table — Clears the Dynamic Address table when checked.
■

Viewing Dynamic Addresses

127