252
C
12: C
HAPTER
ONFIGURING
Q
S
UALITY OF
ERVICE
Egress Shaping Rates — Configures the traffic shaping type for
■
selected interfaces. The possible field values are:
Status — Defines the shaping status.
■
CIR — Defines CIR as the queue shaping type. The possible field
■
range is 64-1,000,000,000 kbits per second.
CbS — Defines CbS as the queue shaping type. The possible field
■
range is 4096-16,769,020 kbits per second.
To configure Bandwidth Settings:
1 Click Policy > QoS General > Bandwidth > Setup. The Bandwidth
Setup Page opens:
Figure 131
Bandwidth Setup Page
The Bandwidth Setup Page contains the following fields:
Interface — Displays the interface for which the global QoS
■
parameters are defined. The possible values are:
Port — Selects the port for which the global QoS parameters are
■
defined.
LAG — Selects the LAG for which the global QoS parameters are
■
defined.
Enable Ingress Rate Limit — Enables setting an Ingress Rate Limit.
■
Ingress Rate Limit — Indicates the traffic limit for the port.
■