3Com 3CRUS2475 User Manual page 4

2 C : A
HAPTER BOUT
User Guide
Overview
T G
HIS UIDE
This section provides an overview to the Embedded Web System User
Guide. The Embedded Web System User Guide provides the following
sections:
Configuring the Wizard — Provides information for configuring the
■
Setup wizard which enables system administrator configure basic
device settings at the Setup stage or to return and reconfigure the
device settings at any stage.
Getting Started — Provides information for using the Embedded
■
Web Management System, including adding, editing, and deleting
device configuration information.
Viewing Basic Settings — provides information for viewing and
■
configuring essential information required for setting up and
maintaining device settings.
Section 4, Configuring Device Security — Provides information for
■
configuring both system and network security, including traffic
control, ACLs, and device access methods.
Managing System Information — Provides information for
■
configuring general system information
system name, the user-defined system location, and the system contact
person.
Configuring Wired Ports — Provides information for configuring
■
Port Settings.
Aggregating Ports — Provides information for configuring Link
■
Aggregation which optimizes port usage by linking a group of ports
together to form a single LAG.
Configuring VLANs — Provides information for configuring VLANs.
■
VLANs are logical subgroups with a Local Area Network (LAN) which
combine user stations and network devices into a single unit,
regardless of the physical LAN segment to which they are attached.
Defining WLAN — Provides information for configuring WLANs. A
■
Wireless Local Area Network (WLAN) is a technology that provides
network services using radio waves.
Configuring IP Information — Provides information for configuring
■
IP addresses, DHCP and ARP.
Configuring Mulitcast Forwarding — Provides information for
■
configuring Multicast forwarding.
including the user-defined