Up — Indicates the LAG is active.
■
Down — Indicates the LAG is inactive.
■
Speed — Indicates the LAG speed. The possible fields values are:
■
10M — Indicates the LAG is currently operating at 10 Mbps.
■
100M — Indicates the LAG is currently operating at 100 Mbps.
■
1000M — Indicates the LAG is currently operating at 1000 Mbps.
■
Auto Negotiation — Displays the auto negotiation status on the
■
LAG. Auto negotiation is a protocol between two link partners that
enables a LAG to advertise its transmission rate, duplex mode, and
flow control abilities to its partner.
Flow Control — Displays the flow control status on the LAG.
■
Operates when the LAG is in full duplex mode.
To configure Link Aggregation:
1 Click Wired Ports > Link Aggregation > Setup. The Link Aggregation
Setup Page opens:
Figure 64 Link Aggregation Setup Page
The Link Aggregation Setup Page includes the following pages:
LAG — Displays the LAG number.
■
Configuring Link Aggregation
133