To configure Rogue Handling:
1 Click Wireless > Rogue Handling > Setup. The Rogue Handling Setup
Page opens:
Figure 82 Rogue Handling Setup Page
The Rogue Handling Setup Page contains the following fields:
Access Point — Contains a list of either the user-defined access
■
points or the MAC address assigned to wireless networks.
Scanning Interval — Indicates the scanning Intervals. The possible
■
field values are:
Long — Scans for rouges at 240 second intervals.
■
Short — Scans for rouges at 20 second intervals.
■
Medium — Scans for rouges at 150 second intervals.
■
Detect on Radio 802.11b/g — Enables Rogue Detection on the
■
Radio 802.11b/g range.
Detect on Radio 802.11a — Enables Rogue Detection on Radio
■
802.11a range.
2 Select the Access Point to be configured.
3 Enable Radio 802.11b/g or Radio 802.11a Rogue Handling detection.
Defining Wireless Rogue Handling
165