3Com 3CRUS2475 User Manual page 161

To remove Wireless Access Points:
1 Click Wireless > Access Point > Remove. The Wireless Access Point
Setup Page opens:
Figure 80 Wireless Access Point Remove Page
The Wireless Access Point Remove Page contains the following fields:
Display — Displays the current Access Points. The optional displays
■
are:
All — Displays all Access Points.
■
Discovered APs — Displays discovered Access Points.
■
Active APs — Displays active Access Points.
■
Name — Displays the user-defined access point name.
■
IP Address — Displays the IP Address assigned to the access point.
■
MAC Address — Displays the MAC Address assigned to the access
■
point.
Type — Displays the antenna type.
■
Radios —
Indicates the radio transceiver type
■
A — Indicates the radio type is 802.11a.
■
G — Indicates the radio type is 802.11g.
■
Defining Wireless Access Points
. The field values are:
161