3Com 3CRUS2475 User Manual page 275

Current Number of Samples — Displays the current number of
■
samples taken.
Owner — Displays the RMON station or user that requested the
■
RMON information. The field range is 0-20 characters.
To configure RMON History:
1 Click Wired Ports > Stats > RMON History > Control Setup. The
RMON History Control Setup Page opens:
Figure 143 RMON History Control Setup Page
The RMON History Control Setup Page contains the following fields:
New History Entry No. — Displays the new entry number for the
■
History Control Table page.
Source Interface — Displays the interface from which the history
■
samples were taken. The possible field values are:
Port — Specifies the port from which the RMON information was
■
taken.
Owner — Displays the RMON station or user that requested the
■
RMON information. The field range is 0-20 characters.
Max No. of Samples to Keep — Number of samples to be saved.
■
The default value is 50.
Configuring RMON History 275